Home » All posts
Wednesday, October 2, 2019
Tips For Makeing Bunny
Fill the length of each rabbit ear tampon with hot glue and press a plastic applicator strip into place, with the pointed end up and the curved part pointing out.
Remove string from Playtex tampon and set it aside. Set the tampon “point” up. Use a generous amount of hot glue to attach ears, placing them inside the “creases” or folds of the tampon.
Cut off the tip of one of the remaining pink plastic applicator “petals.” This triangular piece will be the nose. Hot glue it to the tip of the Playtex tampon.
Hot glue the eyes in place.
Cut the pipe cleaners into four two-inch pieces and hot glue into place on either side of the nose. If you wish to hang the bunny as an ornament, hot glue the reserved string onto the back.
Tips For Making Bunny
Materials
- Playtex tampon with pink plastic applicator
- Two Tampax tampons
- Hot glue gun
- Utility knife or scissors
- Wiggly eyes
- Pipe cleaners
Remove Playtex tampon from applicator. Moisten slightly to expand and let dry. Save pink plastic applicator. Remove Tampax tampons from applicators. Hold tampon, pinching at each end, and pull to expand. Widen in the middle to create an “ear” shape. The string side should be on the back, while the “furrow” side should be on the front. Trim strings off bottom and top if necessary.